Start with five DL Q33 attachments and stationary-target practice, then adjust sensitivity, scope sway and positioning.
With the DL Q33, place your crosshair where an enemy may appear, aim down sights, confirm the target and fire, then return to cover and reposition. Favor attachments that improve ADS and handling. Scope sway, sensitivity and buttons vary by device and preference, so adjust them individually in training instead of copying fixed values.
This is a multiplayer starting point. Check the current Taiwan, Hong Kong and Macau client for weapon stats, attachments, unlocks and ranked restrictions. Results depend on hit location, distance and rules; a shot does not guarantee an elimination.
Five DL Q33 attachments
| Slot | Choice | Purpose and alternatives |
|---|---|---|
| Barrel | MIP Light | Favors faster ADS; compare range or stability losses, and use the stock barrel until unlocked. |
| Stock | YKM Combat Stock | Improves aiming handling; compare a stability stock if sustained scope sway bothers you. |
| Laser | OWC Tactical Laser | Speeds up ADS; a visible laser may reveal where you are preparing to fire. |
| Ammunition | Extended Mag A | Reduces reload frequency; choose another unlocked attachment if you do not need extra rounds. |
| Weapon perk | Sleight of Hand | Shortens reload time; compare FMJ to practice penetration, subject to the match's equipment restrictions. |
Verify names and green/red values in Gunsmith. Faster ADS often costs stability. If scope sway makes aiming difficult, change one mobility attachment first instead of replacing all five and losing track of the cause.
Handling breathing and scope sway
A sniper scope may sway when held on target for a long time. Public player discussions suggest attachments and perks affect related behavior, but the precise mechanics can change with version and settings. Read the Gunsmith descriptions for sway, stability or breathing, then test with the same attachments: aim at a stationary object in training and observe when the crosshair begins to drift.
Do not assume phones, controllers and every mode share a “hold breath” button. Check your device's control interface. If sway hurts accuracy, shorten the time spent pre-aiming, return to cover and look again, or compare stability attachments and perks; this does not ask you to physically hold your breath.
Sensitivity and aiming practice
- Put ADS, fire and movement buttons where you can reach them consistently. Touch, gyroscope and controller options differ; use your usual input.
- With current sensitivity, move the crosshair near a stationary target, aim down sights, confirm and fire. Repeat ten times and watch for consistent overshoot or undershoot.
- Change sniper-scope aiming sensitivity by one small step and repeat. Lower it slightly if you overshoot, raise it slightly if you cannot keep up. Do not change camera, firing and gyroscope values together.
- Add a moving target: predict its route, aim, adjust and fire. Once comfortable, shorten the time between aiming and firing without sacrificing target confirmation to practice quickscoping.
- After every shot, return behind a wall while waiting for the next shot and check another angle. If you do not secure the elimination, call out the target and change cover rather than repeatedly exposing the same window.
Where should you stand?
Raid's central courtyard and pool offer long sightlines, but the official map guide also notes that open areas can be observed from elevated positions. Watch one lane from a wall you can retreat behind and avoid open ground without an exit. When teammates push the objective, call out enemies and cover a flank rather than chasing distant kills and neglecting the objective. More routes appear in the Raid ranked guide.
Sources
Revision history
— Recently updated